8-18CBM concrete mixer drums
Main features Concrete mixing tank with Superior performance Concrete mixing tank adopt auto-welding technology, all welding seams are checked by fault-indica
Share us:

Description

Brief introduction:

8-18CBM concrete mixing drums are large concrete drum adopting combination of oil tanker and radiator, equipped with temperature controller and vacuum meter, ensure the oil change and maintenance, one of non-tilting drum.

8-18CBM concrete mixing drums technical features
1. The design of low angle of inclination: Center of gravity is lower 5% than similar concrete mixing truck, safety factor higher 10%
2. Tank-frame adopt tri-coordinate lineation machine to manufacture, laser-checking ensure the precise locating
3. Simple operation and useful application: Feeding inlet with cone-hole make feeding faster, and reduce the impacting to mixing blades, discharging outlet with reasonable design to ensure the discharging continuously.
4. Operate-handle can control the concrete mixing tank rotating speed and direction, with reliable position-lock device.
5. Multi types of Chassis Matched: The upper can match with different chassis of 2 or 3 axles

Some concrete mixer buyers call concrete mixing drums in Remixer Agitators for concrete mixer trucks and concrete mixers. It is one of important concrete mixers parts to mixing concrete, as a mixing system.

A Remixer Agitator/concrete mixer drums are a holding drum that enables any amount of wet concrete to be discharged as and when it is required–the Remixer basically keeps the concrete agitated so that it doesn’t set. These are ideally suited for use with piling rigs and are available in 2 –8 cubic meter capacities.

As one of reputed concrete mixer drum manufacturers, we also supply concrete batching plant, concrete mixers and concrete trucks.
 

Features and benefits:
Parameters Unit 8m3 9m3 10m3 12m3
Drum leaning angle ° 15 15 15 15
Geometric volume of drum m3 13.3 14.7 16 19.6
Mixing capacity m3 8 9 10 12
Feeding speed m3/min ≥3 ≥3 ≥3 ≥3
Discharging speed m3/min ≥2 ≥2 ≥2 ≥2
Mixing speed r/min 0~14 0~14 0~14 0~14
Discharge residue rate % ≤0.5 ≤0.5 ≤0.5 ≤0.5
Slump range mm 70~260 70~260 70~260 70~260
Capacity of water tank L 450 450 450 450
Water supply method   Pneumatic


 

Parameters Unit 14m3 15m3 16m3 18m3
Drum leaning angle ° 15 15 15 15
Geometric volume of drum m3 21.9 23.8 25.3 26.4
Mixing capacity m3 14 15 16 18
Feeding speed m3/min ≥3 ≥3 ≥3 ≥3
Discharging speed m3/min ≥2 ≥2 ≥2 ≥2
Mixing speed r/min 0~14 0~14 0~14 0~14
Discharge residue rate % ≤0.5 ≤0.5 ≤0.5 ≤0.5
Slump range mm 70~260 70~260 70~260 70~260
Capacity of water tank L 450 450 450 450
Water supply method   Pneumatic
 
Standard Brand
Hydraulic pump Italian ARK/Sauer/Rexroth/Germany ZF
Hydraulic motor
Reducer Germany ZF/ Italian PMB/Eaton

inquiry